Angler fish progress

This blog will continue to be horribly neglected until after Hand In (May 15th!), but here's a little preview of how my angler fish is looking lately:

The frame is almost finished, just got to add a couple of extra poles to the front to hold up the lower jaw.  The plastazote fish skull is getting there as well.  Here's my design concept if you need a reminder.  My plan this week is to get them both finished and stuck together (they're just held with masking tape in this photo to check the positioning) and to cut out and add on the ribs and fins too.  Then next week I can add the lure, paint it all and add the teeth too and then it'll be complete!  I'm counting down the days..

Backpack finished!

I'm in a very celebratory mood today, finally I have something to show for all the work I've been putting into this unit!

May I present to thee my finished carnival backpack:

It may not look like much, but a lot of work went into this baby!   This photo's from today's fitting, which went really well.  It fits Immie like a glove, and the unitard fits just fine as well (no zipper in yet though, hence the pinned up back seam!).  I have since made a few minor adjustments, like adding an extra bolt through the bottom of the mdf, and a couple of extra plastazote wedges underneath the aluminium strips.   But anyhoo, tis done now, and that's a real load off my mind.  Now for the complicated part, the puppet structure!

P.S.  I may be nice and post a tutorial for this at some point.  During my own research on backpacks the complete lack of information available over the internet was EXTREMELY irritating.  Thankfully I went to a workshop with Kinetika where I was able to see a couple of their examples, as well as getting a few pages of instructions that I followed to a certain extent.  It's been quite interesting for those of us working on this project to see how differently each of our backpacks have turned out according to our particular design.

Aaaaaghhh

It looks like my dream of creating my very own Sherlock coat will have to be put on hold for a little while, this final unit is taking over my life.
I haven't actually described it on here yet, so here's theh first paragraph from my learning agreement:

For this unit I will design and make a carnival costume for a principle character in the ‘Spirit of the Sea’ Olympic Torch Relay celebrations in Weymouth.  The theme of the event is ‘Oceans of the World’, so I will research this theme and produce a series of designs, one of which will be selected by the carnival committee.  I will then realise this costume for an individual performer in the procession.

Here's my design:

And in colour:

So jaaa, very exciting - but also somewhat daunting.  I've pretty much finalised the design now, and I've spent the last few days putting together the "backpack"; the bit that the whole structure sits on.  It's not until this past week that I've realised just how lacking in 'workshop' knowledge I've been.  I'd never used a drill before, or a riveter, and terms like penny washers, blind rivets, and countersunk screws meant nothing to me.  It's meant that the start of the construction has been frustratingly slow going at times, while I figure out how everything works, but as I get the hang of more and more things it gets more satisfying.  Luckily for me there are three other students in the same boat, so we lend each other moral support for each day we spend in the workshop learning something new.

I need to get the backpack and the unitard (to be worn underneath) ready for a fitting on friday though, and that's got me hyperventilating somewhat.  For a start I'm going to be in London helping out on a costume photoshoot (can't wait to see the pretties!) on wednesday and thursday, so today's the last day I have to get everything ready.  To complicate matters further, the straps haven't turned up yet.  As I said, aaaaaaaghhhh!!!

Wish me luck!